[Index] 
[FineConnection web site]Enabling Error Control is simple; just add the ThisStation object to the network map and add a link object between the object and the switch or hub to which it is actually connected. The ThisStation object is a special purpose object representing the physical workstation (or server) that runs the Monitor one software. The ThisStation object is the key object for the "Error control" feature.
After adding the "ThisStation" object (and also after each time you add or remove links between device objects) the EC information database needs to synchronize. The EC icon on the Monitor one control panel has changed to the Sync icon: 
. In order to start synchronizing, just click this icon. After seconds the Icon will change back to the normal EC Icon.
During synchronizing, Monitor one automatically switches to Designer mode and will prevent you from entering Designer mode while processing!
The time it takes to synchronize the EC information database heavily depends on the amount of redundancy (the number of redundant paths) in your network and can take from less than a second to a couple of minutes!
If Error Control is enabled, it takes more time before a "No response" status is propagated to the multilevel network map structure and the control panel. The color of the "EC panel" on the Monitor one main window shows Error Control activity.
The "ThisStation" object can only be added once (of course!)
You can verify whether your map is "EC proof" by enabling EC and after that clicking the 
speedbutton on the Monitor one control panel.
Example 1.
A small company has two offices in different cities connected by internet via ADSL. The Firewall in the main office has a problem and is down. As you can see from the screenshot, EC is enabled (the "ThisStation" object is present on the map) but nevertheless all devices in the remote office have been marked "down" (erroneously)!
In the above case, the problem is caused by not checking the "This device forwards traffic…." checkbox for the Class the device "InternetCloud" belongs to. As a result, Monitor one "thinks" that it cannot reach the remote office devices at the other end of the WAN link. Monitor one "thinks" that there are no network paths available from the "ThisStation" object to the devices in the remote offices and displays the little "network disconnected" symbols at the bottom left of each device in the remote office. The "InternetCloud" device represents the huge internet routing network in one device.
After checking the "This device forwards traffic……" checkbox for the Class the "InternetCloud" device belongs to, the network map shows:
Example 2.
The screenshot above shows another interesting example. For reasons of redundancy, a cluster system has two connections to two different switches. Only the first NIC is active, the second one is "Hot-standby". By mistake, the "Forward" setting of the Class the device "Cluster1" belongs to is checked. Switch4 is actually down! Because of the "forward" setting of Cluster1, Monitor one "thinks" that there is an alternate network path to device Switch3, gets no reply from device Switch3 and marks it accordingly.
After clicking the EC verifier speedbutton on the Monitor one control panel, the map shows:
Only TestServer1 has the "No Error Control information available" indicator (it is not connected).
After resetting the "Forward" control (unchecking the checkbox) of the Class the device Cluster1 belongs to, the map shows:
