What is this all about?

Sometimes you need a quick answer to a simple question like:

  • How much bandwidth is my computer using?
  • What is the cpu usage of my server?
  • How many ip addresses does my router have?
  • What are the busiest ports on my switch?

If your deviceĀ supports the SNMP protocol and you have performed a Client installation of FCMS on the Windows PC on which you’re seeing this page right now, you’re ready to go. Select one of the default fcmsURL configurations below and click on the button.

Try it yourself

System

cfg# Type Description Link
10 Retrieves the contents of the System table (description, ID, uptime, contact, name..), and displays it one row at a time. fcmsURL
11 Retrieves the contents of the Host Resources table. Displays the host’s local date and time, its boot parameters etc. fcmsURL
12 All IP information (adresses/masks) of this host. fcmsURL
13 Set the systems’s Name, Contact and Location values through SNMP. Be aware that you need a community name with RW rights! fcmsURL

Interfaces

cfg# Type Description Link
20 Select one interface from a list and show incoming & outgoing KBytes/sec. fcmsURL
21 Collect and show the load (in KBytes/sec) of the Top-20 interfaces in one graph. fcmsURL
22 Show the top listener interfaces in a Pie chart. fcmsURL
23 Show the top talker interfaces in a Pie chart. fcmsURL
24 Interface details (no traffic counters) in a table. One row per interface. fcmsURL
25 Interface traffic counters in a table. One row per interface. fcmsURL
26 Interface error counters in a table. One row per interface. fcmsURL
27 Enable or disable a switchport or server NIC. Be aware that you need a community name with RW rights! You can select the interface at runtime. fcmsURL
28 Select one interface from a list and show incoming & outgoing interface utilization. fcmsURL

CPU, disk & memory

cfg# Type Description Link
40 All storage on the host displayed in a table. One row per logical storage. fcmsURL
41 The CPU utilization averaged over the last minute per CPU. fcmsURL

Routing & Switching

cfg# Type Description Link
60 The routing table. One row per route. An entry with a value of 0.0.0.0 is considered a default route. fcmsURL
61 A table containing static configuration information for each VLAN configured into the device by (local or network) management. fcmsURL